A Feasible Dual Modification Strategy of Internal Anion Redox Chemistry and Surface Engineering on P2 Layer-Structured Cathodes in Sodium-Ion Batteries.

Boosting the anion redox reaction opens up a possibility of further capacity enhancement on transition-metal-ion redox-only layer-structured cathodes for sodium-ion batteries. To mitigate the deteriorating impact on the internal and surface structure of the cathode caused by the inevitable increase in the operation voltage, probing a solution to promote the bulk-phase crystal structure stability and surface chemistry environment to further facilitate the electrochemical performance enhancement is a key issue. A dual modification strategy of establishing an anion redox hybrid activation trigger agent inside the crystal structure in combination with surface oxide coating is successfully developed. P2-type layer structure cathode materials with Zn/Li (Na-O-Zn@Na-O-Li) anion redox hybrid triggers and a ZnO coating layer possess superior capacity and cycle performance, along with outstanding structural stability, decreased Mn-ion dissolution effect, and less crystal particle cracking during the cycling process. This study represents a facile modification solution to perform structure optimization and property enhancement toward high-performance layered structure cathode materials with anion redox features in sodium-ion batteries.

Probing Particle-Carbon/Binder Degradation Behavior in Fatigued Layered Cathode Materials through Machine Learning Aided Diffraction Tomography.

Understanding how reaction heterogeneity impacts cathode materials during Li-ion battery (LIB) electrochemical cycling is pivotal for unraveling their electrochemical performance. Yet, experimentally verifying these reactions has proven to be a challenge. To address this, we employed scanning µ-XRD computed tomography to scrutinize Ni-rich layered LiNi0.6Co0.2Mn0.2O2 (NCM622) and Li-rich layered Li[Li0.2Ni0.2Mn0.6]O2 (LLNMO). By harnessing machine learning (ML) techniques, we scrutinized an extensive dataset of µ-XRD patterns, about 100,000 patterns per slice, to unveil the spatial distribution of crystalline structure and microstrain. Our experimental findings unequivocally reveal the distinct behavior of these materials. NCM622 exhibits structural degradation and lattice strain intricately linked to the size of secondary particles. Smaller particles and the surface of larger particles in contact with the carbon/binder matrix experience intensified structural fatigue after long-term cycling. Conversely, both the surface and bulk of LLNMO particles endure severe strain-induced structural degradation during high-voltage cycling, resulting in significant voltage decay and capacity fade. This work holds the potential to fine-tune the microstructure of advanced layered materials and manipulate composite electrode construction in order to enhance the performance of LIBs and beyond.

Y-tube assisted coprecipitation synthesis of iron-based Prussian blue analogues cathode materials for sodium-ion batteries.

Prussian blue analogues possess numerous advantages as cathode materials for sodium-ion batteries, including high energy density, low cost, sustainability, and straightforward synthesis processes, making them highly promising for practical applications. However, during the synthesis, crystal defects such as vacancies and the incorporation of crystal water can lead to issues such as diminished capacity and suboptimal cycling stability. In the current study, a Y-tube assisted coprecipitation method was used to synthesize iron-based Prussian blue analogues, and the optimized feed flow rate during synthesis contributed to the successful preparation of the material with a formula of Na1.56Fe[Fe(CN)6]0.90□0.10·2.42H2O, representing a low-defect cathode material. This approach cleverly utilizes the Y-tube component to enhance the micro-mixing of materials in the co-precipitation reaction, featuring simplicity, low cost, user-friendly, and the ability to be used in continuous production. Electrochemical performance tests show that the sample retains 69.8% of its capacity after 200 cycles at a current density of 0.5C (1C = 140 mA g-1) and delivers a capacity of 71.9 mA h g-1 at a high rate of 10C. The findings of this research provide important insights for the development of high-performance Prussian blue analogues cathode materials for sodium-ion batteries.

Metabolic score for insulin resistance predicts major adverse cardiovascular event in premature coronary artery disease.

BACKGROUND: The Metabolic Score for Insulin Resistance (METS-IR) index serves as a simple surrogate marker for insulin resistance (IR) and is associated with the presence and severity of coronary artery disease (CAD). However, the prognostic significance of METS-IR in patients with premature CAD remains unclear. This study aims to investigate the prognostic value of METS-IR in premature CAD. METHODS: This retrospective study included 582 patients diagnosed with premature CAD between December 2012 and July 2019. The median follow-up duration was 63 months (interquartile range, 44-81 months). The primary endpoint was Major Adverse Cardiovascular Events (MACE), defined as a composite of all-cause death, non-fatal myocardial infarction (MI), repeat coronary artery revascularization, and non-fatal stroke. RESULTS: Patients with MACE had significantly higher METS-IR levels than those without MACE (44.88±8.11 vs. 41.68±6.87, p<0.001). Kaplan-Meier survival curves based on METS-IR tertiles demonstrated a statistically significant difference (log-rank test, p<0.001). In the fully adjusted model, the Hazard Ratio (95% CI) for MACE was 1.41 (1.16-1.72) per SD increase in METS-IR, and the P for trend based on METS-IR tertiles was 0.001 for MACE. Time-dependent Receiver Operator Characteristic (ROC) analysis of METS-IR yielded an Area Under the Curve (AUC) of 0.74 at 2 years, 0.69 at 4 years, and 0.63 at 6 years. CONCLUSIONS: METS-IR serves as a reliable prognostic predictor of MACE in patients with premature CAD. Therefore, METS-IR may be considered a novel, cost-effective, and dependable indicator for risk stratification and early intervention in premature CAD.

Evolution Path of Precursor-Induced High-Temperature Lithiation Reaction during the Synthesis of Lithium-Rich Cathode Materials.

High-temperature lithiation is one of the crucial steps for the synthesis of Li- and Mn-rich layered metal oxide (LMLO) cathodes. A profound insight of the micromorphology and crystal structure evolution during calcination helps to realize the finely controlled preparation of final cathodes, finally achieving a desired electrochemical performance. In this work, two typical precursors (hydroxide and oxalate) were selected to prepare LMLO. It is found that the influence of the lithium source on reaction pathways is determined by the properties of precursors. In the case of hydroxide as a precursor, whatever lithium sources it is, the flake morphology of LMLO is inherited from hydroxide precursors. This is because the crystal structure of cathode products has a high similarity with its precursor in terms of the oxygen array arrangement, and the topological transformation occurs from hydroxide (P-3ml) to LMLOs (C/2m and R3m). Thus, the morphology and microstructure of LMLO cathodes could be well controlled only by tuning the properties of hydroxide precursors. Conversely, the decomposition of a lithium source has a great influence on the intermediate transformation when oxalate is used as the precursor. This is because a large amount of CO2 is released from the oxalate precursor after the decomposition reaction, resulting in drastic structural changes. At this time, the diffusion ability of the lithium source leads to the competition between the spinel phase and layered phase. Based on this point, the formation of a spinel intermediate phase can be reduced by accelerating the decomposition of the lithium source, contributing to the generation of a highly pure layered phase, thus exhibiting higher electrochemical performance. These insights provide an exciting cue to the rational selection and design of raw materials and lithium sources for the controlled synthesis of LMLO cathodes.

Comparison of seven surrogate insulin resistance indexes for prediction of incident coronary heart disease risk: a 10-year prospective cohort study.

Background: There were seven novel and easily accessed insulin resistance (IR) surrogates established, including the Chinese visceral adiposity index (CVAI), the visceral adiposity index (VAI), lipid accumulation product (LAP), triglyceride glucose (TyG) index, TyG-body mass index (TyG-BMI), TyG-waist circumference (TyG-WC) and TyG-waist to height ratio (TyG-WHtR). We aimed to explore the association between the seven IR surrogates and incident coronary heart disease (CHD), and to compare their predictive powers among Chinese population. Methods: This is a 10-year prospective cohort study conducted in China including 6393 participants without cardiovascular disease (CVD) at baseline. We developed Cox regression analyses to examine the association of IR surrogates with CHD (hazard ratio [HR], 95% confidence intervals [CI]). Moreover, the receiver operating characteristic (ROC) curve was performed to compare the predictive values of these indexes for incident CHD by the areas under the ROC curve (AUC). Results: During a median follow-up period of 10.25 years, 246 individuals newly developed CHD. Significant associations of the IR surrogates (excepted for VAI) with incident CHD were found in our study after fully adjustment, and the fifth quintile HRs (95% CIs) for incident CHD were respectively 2.055(1.216-3.473), 1.446(0.948-2.205), 1.753(1.099-2.795), 2.013(1.214-3.339), 3.169(1.926-5.214), 2.275(1.391-3.719) and 2.309(1.419-3.759) for CVAI, VAI, LAP, TyG, TyG-BMI, TyG-WC and TyG-WHtR, compared with quintile 1. Furthermore, CVAI showed maximum predictive capacity for CHD among these seven IR surrogates with the largest AUC: 0.632(0.597,0.667). Conclusion: The seven IR surrogates (excepted for VAI) were independently associated with higher prevalence of CHD, among which CVAI is the most powerful predictor for CHD incidence in Chinese populations.

Formulating Local Environment of Oxygen Mitigates Voltage Hysteresis in Li-Rich Materials.

Li-rich cathode materials have emerged as one of the most prospective options for Li-ion batteries owing to their remarkable energy density (>900 Wh kg-1). However, voltage hysteresis during charge and discharge process lowers the energy conversion efficiency, which hinders their application in practical devices. Herein, the fundamental reason for voltage hysteresis through investigating the O redox behavior under different (de)lithiation states is unveiled and it is successfully addressed by formulating the local environment of O2-. In Li-rich Mn-based materials, it is confirmed that there exists reaction activity of oxygen ions at low discharge voltage (<3.6 V) in the presence of TM-TM-Li ordered arrangement, generating massive amount of voltage hysteresis and resulting in a decreased energy efficiency (80.95%). Moreover, in the case where Li 2b sites are numerously occupied by TM ions, the local environment of O2- evolves, the reactivity of oxygen ions at low voltage is significantly inhibited, thus giving rise to the large energy conversion efficiency (89.07%). This study reveals the structure-activity relationship between the local environment around O2- and voltage hysteresis, which provides guidance in designing next-generation high-performance cathode materials.

Association between the triglyceride-glucose index and impaired cardiovascular fitness in non-diabetic young population.

BACKGROUND: The triglyceride-glucose (TyG) index has been linked to the onset, progression, and prognosis of cardiovascular disease (CVD) in middle-aged and elderly individuals. Nevertheless, the relationship between the TyG index and impaired cardiovascular fitness (CVF) remains unexplored in non-diabetic young population. METHODS: We used data from the National Health and Nutrition Examination Survey (NHANES) study (1999-2004) to conduct a cross-sectional study of 3364 participants who completed an examination of CVF. Impaired CVF was defined as low and moderate CVF levels determined by estimated maximal oxygen consumption (Vo2max), based on sex- and age-specific criteria. The TyG index was calculated by [Formula: see text]. RESULTS: The age (median with interquartile range) of the study population was 28 (19-37) years, and the TyG index (median ± standard deviation) was 8.36 ± 0.52. A significant association between the TyG index and impaired CVF was found in multivariable logistical regression analysis (per 1-unit increase in the TyG index: OR, 1.46; 95% Cl 1.13-1.90). A dose‒response relationship between the TyG index and impaired CVF was presented by restricted cubic splines (RCS). A significant interaction (p = 0.027) between sex and the TyG index for impaired CVF was found in the population aged < 20 years. CONCLUSIONS: In non-diabetic young population, individuals with higher TyG index values are at an increased likelihood of encountering impaired CVF. Furthermore, sex may exert an impact on CVF, as males tend to be more susceptible to impaired CVF under comparable TyG index conditions.

Prevalence, characteristics and significant predictors for cardiovascular disease of patients with preserved ratio impaired spirometry: A 10-year prospective cohort study in China.

BACKGROUND AND OBJECTIVE: Patients with preserved ratio impaired spirometry (PRIsm) have higher incidence rate of cardiovascular disease (CVD). However, few studies focused on PRIsm in China. We determined the prevalence and characteristics of patients with PRIsm in Chinese population. We also aimed to investigate the significant predictive factors of CVD in PRIsm patients. METHODS: In total, 6994 subjects aged from 35 to 70 years old and free of CVD at baseline were categorized into normal (n = 3895), PRIsm (the ratio of forced expired volume in the first second (FEV1) to forced vital capacity (FVC) ≥0.7 and FEV1 <80 % predicted; n = 1997) and obstructive spirometry (FEV1:FVC<0.7; n = 1102). Cox proportional hazards multivariable regression was performed to investigate how baseline characteristics impact CVD incidence. RESULTS: In participants with PRIsm, men had a 0.68-fold higher risk of CVD incidence than women (HR, 1.68; 95%CI, 1.09-2.59; p = 0.020). Our study showed that the rate of CVD incidence increased by 6.0 % with every year's increase in age (HR, 1.06; 95%CI, 1.04-1.09; p < 0.001). A 0.1 increase in FEV1/FVC was significantly associated with a 23.0 % decrease in CVD incidence (HR, 0.77; 95%CI, 0.61-0.97; p = 0.028). Family history of CVD greatly increased the risk of cardiovascular disease incidence (HR, 1.83; 95%CI, 1.18-2.83; p = 0.007). Higher BMI was also a significant risk factor of CVD incidence (HR, 1.06; 95%CI, 1.01-1.10; p = 0.013). CONCLUSION: The prevalence of PRIsm in China was high. PRIsm subjects should be monitored carefully, especially for the older, male, those with higher BMI, lower FEV1/FVC and family history of CVD.

Single source CARS-based multimodal microscopy system for biological tissue imaging [Invited].

A coherent anti-Stokes Raman scattering (CARS)-based multimodality microscopy system was developed using a single Ti:sapphire femtosecond laser source for biological imaging. It provides three complementary and co-registered imaging modalities: CARS, MPM (multiphoton microscopy), and RCM (reflectance confocal microscopy). The imaging speed is about 1 frame-per-second (fps) with a digital resolution of 1024 × 1024 pixels. This microscopy system can provide clear 2-dimensional and 3-dimensional images of ex-vivo biological tissue samples. Its spectral selection initiates vibrational excitation in lipid cells (approximately 2850 cm-1) using two filters on the pump and Stokes beam paths. The excitation can be tuned over a wide spectral range with adjustable spectral filters. The imaging capability of this CARS-based multimodal microscopy system was demonstrated using porcine fat, murine skin, and murine liver tissue samples.

Oxygen Vacancies Driven by Co in the Deeply Charged State Inducing Intragranular Cracking of Ni-Rich Cathodes.

Intragranular cracking within the material structure of Ni-rich (LiNix Coy Mn1 - x - y , x ≥0.9) cathodes greatly threatens cathode integrity and causes capacity degradation, yet its atomic-scale incubation mechanism is not completely elucidated. Notably, the physicochemical properties of component elements fundamentally determine the material structure of cathodes. Herein, a diffusion-controlled incubation mechanism of intragranular cracking is unraveled, and an underlying correlation model with Co element is established. Multi-dimensional analysis reveals that oxygen vacancies appear due to the charge compensation from highly oxidizing Co ions in the deeply charged state, driving the transition metal migration to Li layer and layered to rock-salt phase transition. The local accumulation of two accompanying tensile strains collaborates to promote the nucleation and growth of intragranular cracks along the fragile rock-salt phase domain on (003) plane. This study focuses on the potential risks posed by Co to the architectural and thermal stability of Ni-rich cathodes and is dedicated to the compositional design and performance optimization of Ni-rich cathodes.

Synthesizing high performance LNMO cathode materials with porous structure by manipulating reynolds number in a microreactor.

The demand for Lithium-ion batteries (LIBs) has significantly grown in the last decade due to their extensive use electric vehicles. To further advance the commercialization of LIBs for various applications, there is a pressing need to develop electrode materials with enhanced performance. The porous microsphere morphology LiNixMn2-xO4(LNMO) is considered to be an effective material with both high energy density and excellent rate performance. Nevertheless, LNMO synthesis technology still has problem such as long reaction time, high energy consumption and environmental pollution. Herein, LNMO microsphere was successfully synthesized with short precursors reaction time (18 s) at 40 °C without using chelating agent by microreaction technology combined solid-state lithiation. The optimized LNMO cathode shows microsphere (∼8µm) morphology stacked by nano primary particles, with abundant mesoporous and fully exposed low-energy plane. The electrochemical analysis indicates that the optimized LNMO cathode demonstrates 97.33% capacity retention even after 200 cycles at 1C. Additionally, the material shows a highly satisfactory discharge capacity of 92.3 mAh·g-1at 10C. Overall, microreaction technology is anticipated to offer a novel approach in the synthesis of LNMO cathode materials with excellent performance.

Manipulating the crystal plane angle within the primary particle arrangement for the radial ordered structure in a Ni-rich cathode.

Ni-rich cathodes with a radial ordered microstructure have been proved to enhance materials' structural stability. However, the construction process of radial structures has not yet been clearly elaborated. Herein, the formation process of radial structures induced by different doped elements has been systematically investigated. The advanced Electron Back Scatter Diffraction (EBSD) characterization reveals that W-doped materials are more likely to form a low-angle arrangement between crystal planes of the primary particles and exhibit twin growth during sintering than a B-doped cathode. The corresponding High Angle Annular Dark Field-Scanning Transmission Electron Microscopy (HAADF-STEM) analysis further proves that the twin growth induced by W doping can promote the migration of Li+. Simultaneously, the W-doped sample reduces the (003) plane surface energy and promotes the retention of the crystal plane, which can effectively alleviate the structural degradation caused by Li+ (de)intercalation. At a cut-off voltage of 4.6 V, the W-doped cathode displays a capacity retention rate of 94.1% after 200 cycles at 1C. This work unveils the influence of different element doping on the structure from the perspective of crystal plane orientation within primary particles and points out the importance of the exposure and orientation of the crystal plane of the particles.

GO-CoNiP New Composite Material Modified Separator for Long Cycle Lithium-Sulfur Batteries.

Lithium-sulfur batteries with high capacity are considered the most promising candidates for next-generation energy storage systems. Mitigating the shuttle reaction and promoting catalytic conversion within the battery are major challenges in the development of high-performance lithium-sulfur batteries. To solve these problems, a novel composite material GO-CoNiP is synthesized in this study. The material has excellent conductivity and abundant active sites to adsorb polysulfides and improve reaction kinetics within the battery. The initial capacity of the GO-CoNiP separator battery at 1 C is 889.4 mAh g-1 , and the single-cycle decay is 0.063% after 1000 cycles. In the 4 C high-rate test, the single-cycle decay is only 0.068% after 400 cycles. The initial capacity is as high as 828.2 mAh g-1 under high sulfur loading (7.3 mg cm-2 ). In addition, high and low-temperature performance tests are performed on the GO-CoNiP separator battery. The first cycle discharge reaches 810.9 mAh g-1 at a low temperature of 0 °C, and the first cycle discharge reaches 1064.8 mAh g-1 at a high temperature of 60 °C, and both can run stably for 120 cycles. In addition, in situ Raman tests are conducted to explain the adsorption of polysulfides by GO-CoNiP from a deeper level.

TMED10 mediates the trafficking of insulin-like growth factor 2 along the secretory pathway for myoblast differentiation.

The insulin-like growth factor 2 (IGF2) plays critical roles in cell proliferation, migration, differentiation, and survival. Despite its importance, the molecular mechanisms mediating the trafficking of IGF2 along the secretory pathway remain unclear. Here, we utilized a Retention Using Selective Hook system to analyze molecular mechanisms that regulate the secretion of IGF2. We found that a type I transmembrane protein, TMED10, is essential for the secretion of IGF2 and for differentiation of mouse myoblast C2C12 cells. Further analyses indicate that the residues 112-140 in IGF2 are important for the secretion of IGF2 and these residues directly interact with the GOLD domain of TMED10. We then reconstituted the release of IGF2 into COPII vesicles. This assay suggests that TMED10 mediates the packaging of IGF2 into COPII vesicles to be efficiently delivered to the Golgi. Moreover, TMED10 also mediates ER export of TGN-localized cargo receptor, sortilin, which subsequently mediates TGN export of IGF2. These analyses indicate that TMED10 is critical for IGF2 secretion by directly regulating ER export and indirectly regulating TGN export of IGF2, providing insights into trafficking of IGF2 for myoblast differentiation.

Intravital microscopy of satellite cell dynamics and their interaction with myeloid cells during skeletal muscle regeneration.

Skeletal muscle regeneration requires the highly coordinated cooperation of muscle satellite cells (MuSCs) with other cellular components. Upon injury, myeloid cells populate the wound site, concomitant with MuSC activation. However, detailed analysis of MuSC-myeloid cell interaction is hindered by the lack of suitable live animal imaging technology. Here, we developed a dual-laser multimodal nonlinear optical microscope platform to study the dynamics of MuSCs and their interaction with nonmyogenic cells during muscle regeneration. Using three-dimensional time-lapse imaging on live reporter mice and taking advantages of the autofluorescence of reduced nicotinamide adenine dinucleotide (NADH), we studied the spatiotemporal interaction between nonmyogenic cells and muscle stem/progenitor cells during MuSC activation and proliferation. We discovered that their cell-cell contact was transient in nature. Moreover, MuSCs could activate with notably reduced infiltration of neutrophils and macrophages, and their proliferation, although dependent on macrophages, did not require constant contact with them. These findings provide a fresh perspective on myeloid cells' role during muscle regeneration.

Improving Low-temperature Performance and Stability of Na2 Ti6 O13 Anodes by the Ti-O Spring Effect through Nb-doping.

Na2 Ti6 O13 (NTO) with high safety has been regarded as a promising anode candidate for sodium-ion batteries. In the present study, integrated modification of migration channels broadening, charge density re-distribution, and oxygen vacancies regulation are realized in case of Nb-doping and have obtained significantly enhanced cycling performance with 92 % reversible capacity retained after 3000 cycles at 3000 mA g-1 . Moreover, unexpected low-temperature performance with a high discharge capacity of 143 mAh g-1 at 100 mA g-1 under -15 °C is also achieved in the full cell. Theoretical investigation suggests that Nb preferentially replaces Ti3 sites, which effectively improves structural stability and lowers the diffusion energy barrier. What's more important, both the in situ X-ray diffraction (XRD) and in situ Raman furtherly confirm the robust spring effect of the Ti-O bond, making special charge compensation mechanism and respective regulation strategy to conquer the sluggish transport kinetics and low conductivity, which plays a key role in promoting electrochemical performance.

Combination of the triglyceride-glucose index and EuroSCORE II improves the prediction of long-term adverse outcomes in patients undergoing coronary artery bypass grafting.

AIMS: We aimed to investigate the independent and combined association of the triglyceride-glucose (TyG) index and EuroSCORE II with major adverse cardiovascular event (MACE) after coronary artery bypass grafting (CABG), and examine whether the addition of the TyG index improves the predictive performance of the EuroSCORE II. MATERIALS AND METHODS: This study included 1013 patients who underwent CABG. The primary endpoint was MACE, which was defined as the composite of all-cause death, repeat coronary artery revascularisation, non-fatal myocardial infarction and non-fatal stroke. The patients were grouped by the TyG index and EuroSCORE II tertiles and the combination of these risk indicators. RESULTS: During the follow-up, 211 individuals developed MACE. Elevated levels of the TyG index and EuroSCORE II were associated with an increased risk of MACE. The hazard ratio [95% confidence interval (CI)] was 3.66 (2.34-5.73) in patients with the highest tertile of the TyG index and EuroSCORE II. Compared with the EuroSCORE II alone, combining the TyG index with EuroSCORE II achieved a better predictive performance [C-statistic increased 0.032, p < 0.001; continuous net reclassification improvement (NRI) (95% CI): 0.364 (0.215-0.514), p < 0.001; integrated discrimination improvement (IDI) (95% CI): 0.015 (0.007-0.023), p < 0.001, Akaike's information criteria (AIC) and Bayesian information criterion (BIC) decreased, and the likelihood ratio test, p < 0.001]. CONCLUSIONS: The TyG index and EuroSCORE II are independently associated with poor prognosis. Furthermore, the TyG index is an important adjunct to the EuroSCORE II for improving risk stratification and guiding early intervention among post-CABG patients.

Triglyceride-glucose index in the prediction of adverse cardiovascular events in patients without diabetes mellitus after coronary artery bypass grafting: a multicenter retrospective cohort study.

BACKGROUND: The triglyceride-glucose (TyG) index has been evaluated as a reliable surrogate for insulin resistance (IR) and has been proven to be a predictor of poor outcomes in patients with cardiovascular diseases. However, data are lacking on the relationship of the TyG index with prognosis in nondiabetic patients who underwent coronary artery bypass grafting (CABG). Thus, the purpose of our current study was to investigate the potential value of the TyG index as a prognostic indicator in patients without diabetes mellitus (DM) after CABG. METHODS: This multicenter, retrospective cohort study involving 830 nondiabetic patients after CABG from 3 tertiary public hospitals from 2014 to 2018. Kaplan-Meier survival curve analysis was conducted followed by the log-rank test. Cox proportional hazards regression models were used to explore the association between the TyG index and major adverse cardiovascular events (MACEs). The incremental predictive power of the TyG index was evaluated with C-statistics, continuous net reclassification improvement (NRI) and integrated discrimination improvement (IDI). RESULTS: An incrementally higher TyG index was associated with an increasingly higher cumulative incidence of MACEs (log-rank test, p < 0.001). The hazard ratio (95% CI) of MACEs was 2.22 (1.46-3.38) in tertile 3 of the TyG index and 1.38 (1.18-1.62) per SD increase in the TyG index. The addition of the TyG index yielded a significant improvement in the global performance of the baseline model [C-statistic increased from 0.656 to 0.680, p < 0.001; continuous NRI (95% CI) 0.269 (0.100-0.438), p = 0.002; IDI (95% CI) 0.014 (0.003-0.025), p = 0.014]. CONCLUSIONS: The TyG index may be an independent factor for predicting adverse cardiovascular events in nondiabetic patients after CABG.

Enhancing the Integral Structural and Thermal Stability of Ultrahigh-Ni Cathodes via Morphology Refinement and In Situ Interfacial Engineering.

Nickel-rich layered oxides are promising cathodes in commercial materials for lithium-ion batteries. However, the increase of the nickel content leads to the decay of cyclic performance and thermal stability. Herein, in situ surface-fluorinated W-doping LiNi0.90Co0.05Mn0.05O2 cathodes enhance integral lithium-ion migration (transfer in bulk and diffusion in the interface) kinetics by synergistically solving the problems of bulk and interface structural degradation. Owing to the introduction of tungsten, the growth of primary particles is regulated toward the (003) crystal plane and with the acicular structure, which further stabilizes the bulk structure during cycling. Moreover, the LiF coating layer on the cathode/electrolyte interface physically isolates the attack of the electrolyte on the surface cathodes and accelerates the lithium-ion diffusion rate, ultimately ameliorating the interfacial dynamics and structural stability. Dual-modified LiNi0.90Co0.05Mn0.05O2 exhibits superior electrochemical properties, especially more remarkable cyclic retention (88.16% vs 70.44%) after 100 cycles at 1 C and more outstanding high current rate properties (173.31 mAh·g-1 vs 135.97 mAh·g-1) at 5 C than the pristine one. This work emphasizes the probability of an integrated optimization strategy for Ni-rich materials, which provides an innovative idea for ameliorating (bulk and interfacial) structure degradation and promoting the diffusion of lithium ions during cycling.